Compressor repair stages at the "COMPRESSOR" service center
8 simple steps to solving compressor problems
1. Compressor disassembly
Screw and reciprocating compressors have been repaired at the «COMPRESSOR» service center for 10 years. We adopt the best practices of world leaders in compressor repair and repair compressors of any complexity. Our tools and diagnostic and repair equipment allow us to work with units of European and American origin.
Automation of most processes and the availability of genuine spare parts, consumables and components reduce compressor repair time to a minimum and, accordingly, reduce the Customer's costs of delivering original parts from abroad.
Before disassembling a compressor, the engineers of the «COMPRESSOR» service center carry out a thorough analysis and visual inspection, review the operating conditions and the probable causes of the equipment failure.
Given the seriousness of the work, the top priority is following the correct procedure and performing a high-quality repair. Pipelines, filters, valve plates and other working elements are removed in the proper order, and fault detection is carried out in parallel.
When the compressor is ready for further repair, it is sent for further diagnostics.
![]() |
2. Compressor fault detection
Compressor fault detection at the service center «COMPRESSOR» is strictly systematic. For effective diagnostics, in addition to visual inspection, special tools and equipment are used. The main advantage of combined diagnostics is that no breakdown or malfunction of the unit can be missed.
The specialists of the Compressor service center pay attention to every detail. The wear of each element is analyzed, and scoring and deformation are checked, for example on the crankshaft. Attention is paid to all spare parts, their correct position and possible mechanical damage — cracks, fractures, correct installation angles.
All sealing valves are inspected. For complete and transparent reporting, each stage of work is recorded in photos (video) at the customer's request.
Rest assured: using high-precision measuring and working tools combined with many years of experience, the service engineers of «NPP SC Compressor» will not miss a single detail, and the subsequent compressor repair will be carried out at a high level.
![]() |
3. Compressor cleaning
The range of compressor repair and maintenance work performed by the service engineers of the Compressor service centernecessarily includes compressor cleaning. Proper cleaning can save up to 15% of the compressor price in the future, which consists of the cost of spare partsthat would fail without this process. We use special tools and methods recommended by equipment manufacturers.
Cleaning removes dust, dirt, debris, grease deposits, paint residues and other foreign substances from the surfaces of the parts and the compressor housing. Safe methods are used that preserve the coating of the spare parts and keep the process fully environmentally friendly. For degreasing, grinding, removing scale and other deposits, and fully restoring surfaces to their original condition, «COMPRESSOR» service engineers may use special detergents, heat treatment and sandblasting.
We guarantee compliance with safety standards and procedures when washing and cleaning compressor components.
Remember: a high-quality repair is impossible without prior cleaning!
![]() |
4. Mechanical repair of compressors
The specialists of Compressor service center regularly repair screw and reciprocating compressors. Professional repair by our engineers significantly extends equipment service life. Our service center «COMPRESSOR» is equipped with the latest equipment and has a wide range of high-quality spare parts and consumables. A comprehensive, structured approach to repair helps avoid further breakdowns or the purchase of a new compressor. Fast repair reduces the downtime of the dependent refrigeration equipment, which means the Customer's losses are minimal.
We perform the following operations at a high level:
- cylinder boring — restoring the correct shape and size of a cylinder deformed by loads. We always aim to bore to the first repair size;
- compressor cylinder sleeving. This is a necessary procedure after boring and grinding, especially for heavily worn cylinders;
- engineers of Compressor service center replace bearings quickly and to a high standard, which helps prevent crankshaft damage and equipment failure;
- crankshaft grinding — performed when scoring or dents are found. Boring of the shaft followed by grinding is also possible;
- repair or replacement of the valve plate. We perform cutting, straightening, heat treatment, grinding and flatness checks on a special surface plate;
- cylinder honing — to achieve minimal roughness of the cylinder surfaces and subsequent running-in of the piston and piston rings. The goal is to extend equipment service life and reduce wear of pistons and cylinders during further operation.
This is far from the full range of work performed by the service center «COMPRESSOR».
We are always ready to repair a compressor with any type and degree of malfunction!
|
5. Electric motor repair
Repair of compressors Frascold, Bock, Bitzer, GEA Grasso, Mycom, Sabroe, Vilter and any other brand includes checking the condition of the electric motor and repairing it if necessary. There are many reasons for motor failure, from oversizing to oil acidity, all of which are determined by prior fault detection. The service center «COMPRESSOR» is equipped with state-of-the-art technology, which allows rewinding the compressor motor stator in the shortest possible time and with maximum accuracy.
Electric motor rewinding is a partially automated process, which ensures exact compliance with technical requirements and high-quality work. Special equipment makes it possible not only to renew the stator winding but also to check and test its parameters.
The company's specialists also install a high-temperature INT sensor, which allows monitoring motor operation and protecting it from thermal stress.
Rest assured, we will give a second life to both the motor and the compressor!
Screw compressor electric motor rewinding by the «COMPRESSOR» service center
![]() |
6. Compressor assembly
Compressor assembly in the workshop Compressor service centeris carried out promptly and professionally. The service engineers of «COMPRESSOR» have professional knowledge and skills and are equipped with modern tools. All processes are well established, and measurements are taken with high-precision instruments. This is what guarantees a high quality of work.
When assembling compressors, the Compressor service center engineers not only install all parts in their original positions but also check all tolerances and carry out in-process tests. No element is finally fixed until its operating parameters and condition have been thoroughly checked, even when a new spare part is installed. Clearances and the fit of all surfaces, couplings and nuts are always checked. Valves are assembled using a special ring plate.
If necessary, welding and hardfacing are carried out. Our specialists work with gas welding equipment and TIG (argon arc) welding.
All compressor assembly work is performed according to specifications and process charts. All actions are documented. We will not miss a single detail.
Responsible engineers and high-class work are guaranteed!
![]() |
7. Compressor testing
For pre-sale and post-repair testing of compressors, the lead engineers of Compressor service center designed and built their own test bench. It simulates the real operating process of a compressor. The bench is automated, works accurately and quickly, and allows the compressor under test to be installed and removed easily and quickly.
This makes it possible to:
- check the mechanical soundness of the compressor's working elements;
- monitor current parameters;
- test under peak loads;
- prevent breakdowns;
- extend service life;
- reduce the costs of repair and of purchasing new equipment.
Unlike standard, narrowly specialized benches, our bench provides a comprehensive check of:
- insulation;
- the motor: all operating characteristics, locked rotor test;
- leak tightness;
- oil condition;
- electrical parameters: starting current, amperage, running current, reverse current;
- compressor pulse test.
Based on the test results, the corresponding technical reports and documents are drawn up confirming the compressor's operability and reliability. Only after this set of work can the compressor be put into operation on site.
![]() |
8. Packing and delivery
The «Compressor» service center takes a responsible approach to packing and transportation of refrigeration equipment. That is why the packing process is carefully supervised by specialists. By following packing rules and procedures, we preserve the integrity and operability of the equipment. The unit is always shipped with the appropriate accompanying documents.
For the Customer's convenience, we have developed a flexible delivery system. Equipment is transported by a carrier convenient for the Client. The compressor can also be shipped to CIS countries and neighboring countries on pre-agreed terms.
This completes the multi-stage equipment repair process.
The equipment is now ready to perform its functions reliably for a long time to come!
![]() |






